S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
PARKER® MOLYTHANE PIP(PRESSURE INVERTING PEDESTAL) RING
The Parker® PIP Ring® profile combines a Pressure Inverting Pedestal with a Type B PolyPak® to provide excellent, bi-directional piston sealing in hydraulic applications. The PIP Ring conforms to the beveled sealing lips of the Type B PolyPak to provide extrusion resistance when pressure is applied to the heel side of the seal. The PIP Ring profile requires only a single seal groove for installation. This eliminates the use of two PolyPak seals on the piston to save space and increase bearing length. Note: The PIP Ring profile may be purchased as an assembly (Type B PolyPak and PIP Ring) or separately as a PIP Ring only. If purchasing as an assembly, the standard material is a 4615 Type B PolyPak with 4617 PIP Ring. If you desire alternate material combinations, please order the PIP Ring and Type B PolyPak separately.
ID-0.75 OD-1 HT-0.062
ID-1 OD-1.25 HT-0.062
ID-1.25 OD-1.5 HT-0.062
ID-1.5 OD-1.75 HT-0.062
ID-1.75 OD-2 HT-0.062
ID-0.75 OD-1.125 HT-0.125
ID-0.875 OD-1.25 HT-0.125
ID-0.937 OD-1.312 HT-0.125
ID-1 OD-1.375 HT-0.125
ID-1.125 OD-1.5 HT-0.125
ID-1.25 OD-1.625 HT-0.125
ID-1.5 OD-1.875 HT-0.125
ID-1.625 OD-2 HT-0.125
ID-1.75 OD-2.125 HT-0.125
ID-2.125 OD-2.5 HT-0.125
ID-2.375 OD-2.75 HT-0.125
ID-2.5 OD-2.875 HT-0.125
ID-3 OD-3.375 HT-0.125
ID-3.125 OD-3.5 HT-0.125
ID-3.625 OD-4 HT-0.125
ID-4 OD-4.375 HT-0.125
ID-1 OD-1.5 HT-0.125
ID-1.25 OD-1.75 HT-0.125
ID-1.5 OD-2 HT-0.125
ID-1.75 OD-2.25 HT-0.125
ID-2 OD-2.5 HT-0.125
ID-2.25 OD-2.75 HT-0.125
ID-2.5 OD-3 HT-0.125
ID-2.75 OD-3.25 HT-0.125
ID-2.875 OD-3.375 HT-0.125
ID-3 OD-3.5 HT-0.125
ID-3.25 OD-3.75 HT-0.125
ID-3.5 OD-4 HT-0.125
ID-3.75 OD-4.25 HT-0.125
ID-4 OD-4.5 HT-0.125
ID-4.25 OD-4.75 HT-0.125