S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
PARKER® STANDARD MOLYTHANE LOADED LIP SEAL POLYPAKS®
Parker® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the O-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the O-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
ID-10.75 OD-11.5 HT-0.375
ID-11.5 OD-12.25 HT-0.375
ID-12 OD-12.75 HT-0.375
ID-12.75 OD-13.5 HT-0.375
ID-13.5 OD-14.25 HT-0.375
ID-14 OD-14.75 HT-0.375
ID-15 OD-15.75 HT-0.375
ID-15.75 OD-16.5 HT-0.375
ID-16 OD-16.75 HT-0.375
ID-16.25 OD-17 HT-0.375
ID-17.25 OD-18 HT-0.375
ID-23 OD-23.75 HT-0.375
ID-1.437 OD-2.25 HT-0.406
ID-1.75 OD-2.562 HT-0.406
ID-1 OD-1.875 HT-0.437
ID-1.25 OD-2.125 HT-0.437
ID-1.375 OD-2.25 HT-0.437
ID-1.437 OD-2.312 HT-0.437
ID-1.5 OD-2.375 HT-0.437
ID-1.75 OD-2.625 HT-0.437
ID-1.875 OD-2.75 HT-0.437
ID-2 OD-2.875 HT-0.437
ID-2.125 OD-3 HT-0.437
ID-2.875 OD-3.75 HT-0.437
ID-3 OD-3.875 HT-0.437
ID-3.125 OD-4 HT-0.437
ID-4 OD-4.875 HT-0.437
ID-4.75 OD-5.625 HT-0.437
ID-5.125 OD-6 HT-0.437
ID-5.5 OD-6.375 HT-0.437
ID-0.625 OD-1.625 HT-0.5
ID-1.25 OD-2.25 HT-0.5
ID-1.375 OD-2.375 HT-0.5
ID-1.5 OD-2.5 HT-0.5
ID-1.75 OD-2.75 HT-0.5
ID-1.875 OD-2.875 HT-0.5