These seals are low pressure nitrile seals. These seals are primarily used to seal grease and lubricating oils up to 10 PSI at temperatures from -40 degrees F to +250 degrees F. Seals should be lubricated during installation for best results
ID-0.187 OD-0.75 HT-0.25 SPEC SHEET
ID-0.375 OD-0.687 HT-0.156 SPEC SHEET
ID-0.375 OD-0.75 HT-0.25 SPEC SHEET
ID-0.437 OD-0.875 HT-0.25 SPEC SHEET
ID-0.434 OD-0.999 HT-0.25 SPEC SHEET
ID-0.5 OD-1 HT-0.25 SPEC SHEET
ID-0.5 OD-0.687 HT-0.093 SPEC SHEET
ID-0.5 OD-0.685 HT-0.125 SPEC SHEET
ID-0.562 OD-0.75 HT- 0.093 SPEC SHEET
ID-0.5 OD-0.749 HT-0.165 SPEC SHEET
ID-0.5 OD-0.875 HT-0.25 SPEC SHEET
ID-0.5 OD-0.875 HT-0.312 SPEC SHEET
ID-0.5 OD-0.999 HT-0.25 SPEC SHEET
ID-0.562 OD-0.999 HT-0.25 SPEC SHEET
ID-0.5 OD-1.089 HT- 0.375 SPEC SHEET
ID-0.5 OD-1.125 HT- 0.25 SPEC SHEET
ID-0.5 OD-1.124 HT-0.25 SPEC SHEET
ID-0.5 OD-1.25 HT-0.25 SPEC SHEET
ID-43832 OD- 1-3/8 HT- 1/4 SPEC SHEET
ID-0.562 OD-1.124 HT-0.25 SPEC SHEET
ID-0.625 OD-0.937 HT-0.187 SPEC SHEET
ID-0.625 OD-0.999 HT-0.25 SPEC SHEET
ID-0.625 OD-1.062 HT-0.25 SPEC SHEET
ID-0.625 OD-1.125 HT-0.093 SPEC SHEET
ID-0.687 OD-1.87 HT-0.187 SPEC SHEET
ID-0.625 OD-1.124 HT-0.25 SPEC SHEET
ID-0.625 OD-1.125 HT-0.25 SPEC SHEET
ID-0.625 OD-1.25 HT-0.25 SPEC SHEET
ID-0.625 OD-1.375 HT-0.25 SPEC SHEET
ID-0.625 OD-1.575 CS-0.312 SPEC SHEET
ID-0.687 OD-0.999 HT-0.187 SPEC SHEET
