Wear rings are used to prevent metal to metal contact of moving parts in hydraulic and pneumatic cylinders. They also center the piston and rod for optimum seal life. The glass-filled nylon material offers compressive strengths similar to most metals used for this purpose and will ingest contaminants such as metal chips, thus avoiding scoring and seal damage. Nylon wearbands are easily cut down from larger sizes to fit any size piston or rod. Consult sales for sizes not shown. A Suffix = Angle Cut
ID-284 OD-290 HT- 19.2 WL-3 SPEC SHEET
ID-280 OD-290 HT- 25 WL-5 SPEC SHEET
ID-290 OD-296 HT- 19.2 WL-3 SPEC SHEET
ID-25 OD-29 HT- 9.6 WL-2 SPEC SHEET
ID-294 OD-300 HT- 19.2 WL-3 SPEC SHEET
ID-295 OD-300 HT- 25 WL-2.5 SPEC SHEET
ID-25 OD-30 HT- 5.6 WL-2.5 SPEC SHEET
ID-26 OD-30 HT- 9.6 WL-2 SPEC SHEET
ID-305 OD-310 HT- 20 WL-2.5 SPEC SHEET
ID-305 OD-310 HT-25 WL-2.5 SPEC SHEET
ID-25 OD-31 HT- 9.6 WL-3 SPEC SHEET
ID-315 OD-320 HT- 25 WL-2.5 SPEC SHEET
ID-320 OD-325 HT- 30 WL-2.5 SPEC SHEET
ID-27 OD-32 HT- 5.6 WL-2.5 SPEC SHEET
ID-28 OD-32 HT- 9.6 WL-2 SPEC SHEET
ID-27 OD -32 HT- 9.7 WL-2.5 SPEC SHEET
ID-26 OD -32 HT- 9.8 WL-3 SPEC SHEET
ID-325 OD -330 HT- 25 WL-2.5 SPEC SHEET
ID-325 OD-330 HT- 30 WL-2.5 SPEC SHEET
ID-30 OD-33 HT- 5.6 WL-1.5 SPEC SHEET
ID-28 OD-33 HT- 5.7 WL-2.5 SPEC SHEET
ID-335 OD -340 HT- 25 WL-2.5 SPEC SHEET
ID-340 OD -345.5 HT- 30 WL-2.75 SPEC SHEET
ID-340 OD-345 HT- 25 WL-2.5 SPEC SHEET
ID-340 OD-345 HT- 30 WL-2.5 SPEC SHEET
ID-340 OD -346.5 HT- 30 WL-3.25 SPEC SHEET
ID-340 OD -346 HT- 30 WL-3 SPEC SHEET
ID-340 OD -347 HT- 30 WL-3.5 SPEC SHEET
ID-30 OD -34 HT- 9.6 WL-2 SPEC SHEET
ID-28 OD-34 HT- 9.6 WL-3 SPEC SHEET
ID-345 OD-350 HT- 20 WL-2.5 SPEC SHEET
ID-345 OD -350 HT- 25 WL-2.5 SPEC SHEET
ID-340 OD-350 CS-30 WL-5 SPEC SHEET
ID-350 OD-355 HT- 30 WL-2.5 SPEC SHEET
ID-349 OD -356.3 HT- 25.4 WL-3.65 SPEC SHEET
ID-349 OD -356.5 HT- 25.4 WL-3.75 SPEC SHEET
