Piston Cups Are Suitable For Hydraulic Applications. Most Cups Are Supplied Solid. Non-Standard Sizes available.

DR - SINGLE ACTING FABRIC/NITRILE PISTON CUP - INCH
DR - SINGLE ACTING FABRIC/NITRILE PISTON CUP - INCH

DR - SINGLE ACTING FABRIC/NITRILE PISTON CUP - INCH

DR Fabric Reinforced Nitrile Piston Cups are suitable for hydraulic applications. Most cups are supplied solid. Custom center holes and bolt holes are available at an additional charge. Many sizes are also available from stock in Fabric and Viton. Consult sales office for price and availability of non-standard sizes. Temperature: -40° to 250°F Pressure: 0 to 3,000 PSI

SC - SINGLE ACTING HOMOGENOUS NITRILE PISTON CUP - INCH
SC - SINGLE ACTING HOMOGENOUS NITRILE PISTON CUP - INCH

SC - SINGLE ACTING HOMOGENOUS NITRILE PISTON CUP - INCH

SC Homogeneous nitrile piston cups are used primarily for pneumatic and low pressure hydraulic applications. Most cups are supplied solid. Center holes and bolt holes are available at an additional charge. Consult sales for price and availability of non-standard sizes. Temperature: -40° to 250°F Pressure: 0 to 800 PSI

CS - SINGLE ACTING URETHANE PISTON CUP - INCH
CS - SINGLE ACTING URETHANE PISTON CUP - INCH

CS - SINGLE ACTING URETHANE PISTON CUP - INCH

CS type piston cups are molded of urethane and are recommended for hydraulic applications. Most cups are supplied solid. Center holes and bolt holes are available at an additional charge. Temperature: -65° to 200°F Pressure: 0 to 5,000 PSI

CT - SINGLE ACTING THIN WALL URETHANE PISTON CUP - INCH
CT - SINGLE ACTING THIN WALL URETHANE PISTON CUP - INCH

CT - SINGLE ACTING THIN WALL URETHANE PISTON CUP - INCH

CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. The thinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge. Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI

MIL - Miller A®, JW® & HW® REPL PISTON CUP - INCH-INCH
MIL - Miller A®, JW® & HW® REPL PISTON CUP - INCH-INCH

MIL - Miller A®, JW® & HW® REPL PISTON CUP - INCH-INCH

These homogeneous nitrile piston cups are found in older Miller A®, JW® and HW® cylinders. The unique base step and thin lip configuration assure stability and low friction. Temperature: -40° to 250°F Pressure: 0 to 800 PSI

DK - DOUBLE ACTING NBR/STEEL PISTON CUP - INCH
DK - DOUBLE ACTING NBR/STEEL PISTON CUP - INCH

DK - DOUBLE ACTING NBR/STEEL PISTON CUP - INCH

The DK type piston cup is a complete pneumatic piston with a double lip seal vulcanized to a metal support disk. The lip geometry provides low breakout and running friction, and it can be used in unlubricated air after initial assembly lubrication. Because of the complete rubber covering, corrosion is not a problem. Temperature: -20° to 175°F Pressure: 0 to 235 PSI

DK - DOUBLE ACTING NBR/STEEL PISTON CUP - METRIC
DK - DOUBLE ACTING NBR/STEEL PISTON CUP - METRIC

DK - DOUBLE ACTING NBR/STEEL PISTON CUP - METRIC

The DK type piston cup is a complete pneumatic piston with a double lip seal vulcanized to a metal support disk. The lip geometry provides low breakout and running friction, and it can be used in unlubricated air after initial assembly lubrication. Because of the complete rubber covering, corrosion is not a problem. Temperature: -20° to 175°F Pressure: 0 to 235 PSI

DP - DBL ACTING NBR/STEEL PISTON CUP w/CUSHION - METRIC
DP - DBL ACTING NBR/STEEL PISTON CUP w/CUSHION - METRIC

DP - DBL ACTING NBR/STEEL PISTON CUP w/CUSHION - METRIC

The DK type piston cup is a complete pneumatic piston with a double lip seal vulcanized to a metal support disk. The lip geometry provides low breakout and running friction, and it can be used in unlubricated air after initial assembly lubrication. Because of the complete rubber covering, corrosion is not a problem. Temperature: -20° to 175°F Pressure: 0 to 235 PSI

CB - DOUBLE ACTING NBR/STEEL PISTON CUP - INCH
CB - DOUBLE ACTING NBR/STEEL PISTON CUP - INCH

CB - DOUBLE ACTING NBR/STEEL PISTON CUP - INCH

This double acting piston cup is a single piece unit designed to be fastened directly to the rod. The existing center hole may be enlarged to fit larger diameters. The cup is made of 90 durometer nitrile vulcanized to the coated steel plate. It is suitable for use in pneumatic and low pressure, light duty hydraulic cylinders. Temperature: -40° to 200°F Pressure: 0 to 250 PSI

TDH - DBL ACTING NBR/STEEL PISTON CUP w/SPRING - METRIC
TDH - DBL ACTING NBR/STEEL PISTON CUP w/SPRING - METRIC

TDH - DBL ACTING NBR/STEEL PISTON CUP w/SPRING - METRIC

These spring-energized TDH style piston cups are designed to handle higher system pressures than non-energized cups. They are perfect for low pressure hydraulic applications. Due to the steel center, they can be bolted directly to the rod, no piston is needed. Temperature: -20° to 212°F Pressure: 0 to 580 PSI

BMP -SINGLE ACTING URETHANE PISTON CUP W/CUSHION - INCH
BMP -SINGLE ACTING URETHANE PISTON CUP W/CUSHION - INCH

BMP -SINGLE ACTING URETHANE PISTON CUP W/CUSHION - INCH

The BMP seal is a combination piston/cushion seal. The design combines the lip of a pneumatic piston seal with buffers to reduce the chance of metal to metal contact at the end stroke of a cylinder. Made of 90A urethane this seal offers effective sealing and low friction while reducing cylinder noise. Temperature : -50° to 180°F Pressure : 0 to 230 PSI