3 x 2.625 x 0.281 3 Pc NBR/Moly-Glass Piston T-Seal Assembly Inch

Piston T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems:
1.Extrusion through the clearance gap, and;
2.Spiral or twisting failure due to instability in their groove. T-seals back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ring grooves. Please refer to Wide Base T-seals in this section.
Temperature: -40° to 225°F
Pressure: 0 to 5,000 PSI