MDU - SPLIT TFE/BRONZE/STEEL ROD BUSHING - METRIC

These TFE backup rings are used to increase the pressure rating for u-cups, and are machined to close tolerances. Most sizes are stocked solid. They may be split with a sharp razor knife for ease of installation. Temperature range is -65°F to 500°F.

CP - PLASTIC CAP PLUG THREAD PROTECTORS - INCH
CP - PLASTIC CAP PLUG THREAD PROTECTORS - INCH

CP - PLASTIC CAP PLUG THREAD PROTECTORS - INCH

These cap plugs are manufactured from low density polyethylene and are designed to protect and plug hose ends and cylinder ports.

SSR - STEEL VEE PACKING WAVE COMPRESSION SPRING - INCH
SSR - STEEL VEE PACKING WAVE COMPRESSION SPRING - INCH

SSR - STEEL VEE PACKING WAVE COMPRESSION SPRING - INCH

Wave springs are typically used in conjunction with vee packing sets to apply a constant load to the seals. They are also found in some telescopic cylinders. Please consult sales for sizes not listed.

MRT - NYLON or PHENOLIC CUSHION SEAL - METRIC
MRT - NYLON or PHENOLIC CUSHION SEAL - METRIC

MRT - NYLON or PHENOLIC CUSHION SEAL - METRIC

These cushion seals are made from nylon or phenolic, and are found in Asian manufactured heavy equipment cylinders. As their name implies, they cushion the stroke of the cylinder rod by limiting fluid from passing through the port.

V6 - PNEUMATIC URETHANE CUSHION SEAL - INCH
V6 - PNEUMATIC URETHANE CUSHION SEAL - INCH

V6 - PNEUMATIC URETHANE CUSHION SEAL - INCH

Made from urethane these cushioning seals act not only as a seal but also as a check valve. They are easy to install and work well in small housings and simple grooves. Temperature: -20°F to +175°F Pressure: PSI 225

1300 - INTERNAL STEEL TRUARC® RETAINING RING - INCH
1300 - INTERNAL STEEL TRUARC® RETAINING RING - INCH

1300 - INTERNAL STEEL TRUARC® RETAINING RING - INCH

Retaining rings are precision-engineered components; which when applied in bores provides a shoulder that accurately positions, locates or retains other parts of an assembly. They can be used to replace pins and washers, threaded sections, collars, machine shoulders and other costly or time consuming methods.

1400 - EXTERNAL STEEL TRUARC® RETAINING RING - INCH
1400 - EXTERNAL STEEL TRUARC® RETAINING RING - INCH

1400 - EXTERNAL STEEL TRUARC® RETAINING RING - INCH

Retaining rings are precision-engineered components; which when applied in bores provides a shoulder that accurately positions, locates or retains other parts of an assembly. They can be used to replace pins and washers, threaded sections, collars, machine shoulders and other costly or time consuming methods.

HLR - STEEL HOOK LOCK RETAINING RING - INCH
HLR - STEEL HOOK LOCK RETAINING RING - INCH

HLR - STEEL HOOK LOCK RETAINING RING - INCH

Hook lock retainers are used to hold the rod gland in place within the cylinder tube. They are sold in common lengths and may be cut down with a hacksaw for in-between sizes. Square steel stock may be purchased by the foot in bulk to make your own retainers. Lengths over 1 ft. may have to be slightly coiled for shipping but may be re-straightened without harm.

RR - INTERNAL STEEL SPIRAL RETAINING RING - INCH
RR - INTERNAL STEEL SPIRAL RETAINING RING - INCH

RR - INTERNAL STEEL SPIRAL RETAINING RING - INCH

Retaining rings are precision-engineered components; which when applied in bores provides a shoulder that accurately positions, locates or retains other parts of an assembly. They can be used to replace pins and washers, threaded sections, collars, machine shoulders and other costly or time consuming methods.

RS - EXTERNAL STEEL SPIRAL RETAINING RING - INCH
RS - EXTERNAL STEEL SPIRAL RETAINING RING - INCH

RS - EXTERNAL STEEL SPIRAL RETAINING RING - INCH

Retaining rings are precision-engineered components; which when applied on shafts provides a shoulder that accurately positions, locates or retains other parts of an assembly. They can be used to replace pins and washers, threaded sections, collars, machine shoulders and other costly or time consuming methods.

RSI - ROUND STEEL INTERNAL RETAINING RING - INCH
RSI - ROUND STEEL INTERNAL RETAINING RING - INCH

RSI - ROUND STEEL INTERNAL RETAINING RING - INCH

Round Section Retaining rings are wound from spring steel. They are made slightly oversize so they snap tightly into the groove in the bore of the cylinder. Some parts have recesses ground into the rings for removal. Consult sales for sizes not listed

RSE - ROUND STEEL EXTERNAL RETAINING RING - INCH
RSE - ROUND STEEL EXTERNAL RETAINING RING - INCH

RSE - ROUND STEEL EXTERNAL RETAINING RING - INCH

External Round Section Retaining rings are wound from spring steel. They are made slightly undersize so they snap tightly into the groove in the shaft. Some parts have recesses ground into the rings for removal. Consult sales for sizes not listed.

AR - RSE U-CUP RETAINING RING - METRIC
AR - RSE U-CUP RETAINING RING - METRIC

AR - RSE U-CUP RETAINING RING - METRIC

These plastic retaining rings are commonly used with the RSE piston u-cups. Their primary use is to hold the seal from sliding off the piston during the return stroke. They allow for a piston to be designed with the steel to be removed from the end for easy installation of the piston seal.

MNR - NYLON MAILHOT® REPLACEMENT RETAINING RING
MNR - NYLON MAILHOT® REPLACEMENT RETAINING RING

MNR - NYLON MAILHOT® REPLACEMENT RETAINING RING

The MNR nylon retainer is used with the BP style piston seal above in many Mailhot® telescopic cylinders. Temp -50° to 230° PSI 0 – 6000