Home  >  BACKUP RINGS  >  BU-T - PTFE U-CUP BACK UP - INCH  > 2.5 x 3 x .062 Solid PTFE U-Cup Back Up Ring Inch

2.5 x 3 x .062 Solid PTFE U-Cup Back Up Ring Inch

Item #:BU-2500-3000-062-T 
Available: 14.00
These solid backup rings are machined from virgin PTFE and are normally used with 8400 and 6226 series U-Cups when additional extrusion resistance is required. Parts marked with suffix "S" are split.

18.43
Each
Quantity:
Quantity Price
1 18.43
Hydraulic SealAlternative Seals: 8700, BU-N, BU-H

ID-2.5 OD-3 HT-0.062
SPEC SHEET

BS-25002500

2.5 x 3 x 0.25 Polyurethane Double Lip Rod U-Cup Inch

The BS series hydraulic rod seal is ideally suited for heavy-duty mobile and stationary service where leakage must be held to an absolute minimum. This unique geometry is highly resistant to side loading and insensitive to pressure spikes. The BS profile reduces or eliminates leakage under severe operating conditions. It also reduces wear and dry run. Rod lubricant is retained in the cavity formed by the secondary lip providing exceptionally low running friction even at low velocities. Sealing performance is outstanding, even at 0 PSI.
Temperature: -50°F to 230°F

Item #:
BS-25002500
17.52
Each
BS-25002500-284

2.5 x 3 x 0.284 Polyurethane Double Lip Rod U-Cup Inch

The BS series hydraulic rod seal is ideally suited for heavy-duty mobile and stationary service where leakage must be held to an absolute minimum. This unique geometry is highly resistant to side loading and insensitive to pressure spikes. The BS profile reduces or eliminates leakage under severe operating conditions. It also reduces wear and dry run. Rod lubricant is retained in the cavity formed by the secondary lip providing exceptionally low running friction even at low velocities. Sealing performance is outstanding, even at 0 PSI.
Temperature: -50°F to 230°F

Item #:
BS-25002500-284
17.65
Each
BS-25002500-375

2.5 x 3 x 0.375 Polyurethane Double Lip Rod U-Cup Inch

The BS series hydraulic rod seal is ideally suited for heavy-duty mobile and stationary service where leakage must be held to an absolute minimum. This unique geometry is highly resistant to side loading and insensitive to pressure spikes. The BS profile reduces or eliminates leakage under severe operating conditions. It also reduces wear and dry run. Rod lubricant is retained in the cavity formed by the secondary lip providing exceptionally low running friction even at low velocities. Sealing performance is outstanding, even at 0 PSI.
Temperature: -50°F to 230°F

Item #:
BS-25002500-375
19.18
Each
BU-2500-3000-062-T
2.5 x 3 x .062 Solid PTFE U-Cup Back Up Ring Inch
18.43
Each
14.00
Quantity: