S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
TP0 - 3 PC NITRLIE PISTON T-SEAL w/NYLON BACKUPS- INCH
Piston T-seals were originally developed to replace O-rings, and retrofit into standard commercial O-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up O-ring grooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Styles may vary by manufacturer.
ID-14.5 OD-22 HT-3.2
SPEC SHEET
Styles may vary by manufacturer.
ID-24.5 OD-32 HT-3.2
SPEC SHEET
Styles may vary by manufacturer.
ID-28.5 OD-36 HT-3.2
SPEC SHEET
Styles may vary by manufacturer.
ID-32.5 OD-40 HT-3.2
SPEC SHEET
Styles may vary by manufacturer.
ID-14 OD-25 HT-4.2
SPEC SHEET
Styles may vary by manufacturer.
ID-21 OD-32 HT-4.2
SPEC SHEET
Styles may vary by manufacturer.
Alternative Seals: AS4, AS5, AS6, AS7, PSPID-52 OD-63 HT-4.2
SPEC SHEET
Styles may vary by manufacturer.
ID-59 OD-70 HT-4.2
SPEC SHEET
Styles may vary by manufacturer.
ID-64 OD-75 HT-4.2
SPEC SHEET
Styles may vary by manufacturer.
ID-24.5 OD-40 HT-6.3
SPEC SHEET
Styles may vary by manufacturer.
ID-29.5 OD-45 HT-6.3
SPEC SHEET
Styles may vary by manufacturer.
ID-34.5 OD-50 HT-6.3
SPEC SHEET
Styles may vary by manufacturer.
ID-54.5 OD-70 HT-6.3
SPEC SHEET
Styles may vary by manufacturer.
ID-59.5 OD-75 HT-6.3
SPEC SHEET
Styles may vary by manufacturer.
ID-64.5 OD-80 HT-6.3
SPEC SHEET
Styles may vary by manufacturer.
ID-69.5 OD-85 HT-6.3
SPEC SHEET
Styles may vary by manufacturer.
ID-149 OD-170 HT-8.1
SPEC SHEET
Styles may vary by manufacturer.
ID-179 OD-200 HT-8.1
SPEC SHEET
Styles may vary by manufacturer.
ID-7.5 OD-15 HT-3.2
SPEC SHEET
Styles may vary by manufacturer.
ID-8.5 OD-16 HT-3.2
SPEC SHEET
Styles may vary by manufacturer.
ID-12.5 OD-20 HT-3.2
SPEC SHEET